Access to under the vehicle (see illustration) minutes for the oil to settle in the sump once the underside of the vehicle will be greatly 8 Using an oil filter removal tool, slacken the more. With the new oil circulated and the filter improved if it can be raised on a lift, driven filter initially. Loosely wrap some rags around now completely full, recheck the level on the onto ramps or jacked up and supported on the oil filter, then unscrew it and immediately dipstick and add more oil if necessary. axle stands (see "Jacking and Vehicle position it with its open end uppermost to 15 Dispose of the used engine oil safely with Support"). Whichever method is chosen, prevent further spillage of oil. Remove the oil reference to "General repair procedures" in
5. Dismount the high-pressure fuel pipes from the fuel pump to the fuel valves. Dismount the return oil connection from the fuel valves at the fuel pump. Disconnect the control air pipe from the starting valve. Remove the screws in the flange connection for the starting valve. 6. Connect the high-pressure pump to the coupling in the hydraulic ring. Vent the system and increase the pressure. Loosen the outer nuts, then relieve the system of pressure. Remove the high- pressure pump and unscrew the nuts. 7. In case of a leaking hydraulic unit, this must be blocked, after which the nut can be loosened by means of the special hexagonal spanner. 8. Hook on the engine-room crane to the lifting attachment on top of the exhaust valve. Lift away the cylinder cover and land it on a couple of wooden planks. 9. Remove and discard the sealing ring between cylinder cover and cylinder liner. VOCABULARY remove kõrvaldama, eemaldama
annaabi.ee 
