non-return valve tagasilöögiklapp ensure kindlustama even distribution ühtlane jaotamine, jagunemine lubricator määrdeseadis; lubrikaator correspond vastavuses olema orifice ava CYLINDER COVER The cylinder cover is made of steel and has a central bore for the exhaust valve, which is attached by means of four studs. The cover furthermore has bores for the fuel valves, which are mounted by means of spring housings with disc springs under the nuts of the studs. Other bores have been provided for starting valve, starting air inlet, safety valve and indicator cock. A ring is welded underside of the cylinder cover whereby a cooling water space is formed. Another cooling water space is formed around the exhaust valve seat. These two spaces communicate through a large number of radial cooling bores. The cooling water is supplied from the upper part of the cooling jacket surrounding
6 Unscrew the nuts at both tensioning cable electric pump located in the left-hand side of Adjustment the boot. Hydraulic rams, mounted on each blocks. 9 The sunroof panel can be adjusted within side of the vehicle by the rear wheel housings, 7 Pull the roof and cable from the rail and its aperture and for flush fitting with the roof actuate the roof folding mechanism. A control release the cable. panel in the following way. switch is mounted on the centre console. In
annaabi.ee 
